LiFePO4/Lithium Ion/Lead Acid Battery...
A rol of 100 Meter 24AWG 5 Wires PVC...
10S Lithium Ion BMS for Bottle Battery Case for 10 Li-Ion battery cells in series.
By buying this product you can collect up to 2
loyalty points.
Your cart will total 2
points that can be converted into a voucher of
$0.40.
BMS - Battery management system for 10S Li_Ion Battery Cells
Specification:
| Voltage | Balancing Voltage | 4.20±0.025V |
| Current | Balancing Current - each cell | 84±10mA |
| Static Current-each cell | ≤20µA | |
| Maximum Charge Current | 5A | |
| Maximum Continuous Discharge Current | 10A | |
| Charging Over Voltage Protection - each cell | Charging Over Voltage Protection Detecting | 4.250±0.025V |
| Charging Over Voltage Detecting Delay Time | 0.5S-2S | |
| Charging Over Voltage Protection Release | 4.1±0.025V | |
| Discharge Under Voltage Protection - each cell | Discharge Under Voltage Protection Detecting | 2.50±0.062V |
| Discharge Under Voltage Protection Delay Time | 50mS - 200mS | |
| Discharge Under Voltage Protection Release | 3.0±0.1V | |
| Over Current Protection | Over Current Detection Voltage | 0.2±0.02V |
| Over Current Detection | 65±10A | |
| Over Current Detection Delay Time | 5mS - 20mS | |
| Over Current Protection Release | To disconnect load and recover automatically | |
| Short Circuit Protection | Short Circuit Protection Delay Time | 200µs - 500µs |
| Short Circuit Protection Release | To remove the short circuit and recover automatically | |
| Impedance | Protection Circuit(Mosfets) | ≤20mΩ |
| Temperature | Working Temperature | -40°C - +85 °C |
| Storage Temperature | -40°C - +125 °C |
No customer comments for the moment.
Only registered users can post a new comment.
